<p>construction sequence First of all, the ecological wood grille skeleton production for accurate measurement of good enough to be able to install. Keel is to be carried out to be finished, the surface of the polishing process, the interface to be open tenon, horizontal, vertical keel junctions need to semi-slotted lap, but also for flame retardant brushing treatment. 2, the installation of ecological wood grille should be installed according to the design pop-up elevation </p>
<p>control lines and boom installation line, in the wall and roof drilling under the wooden wedge, top bar hanging pieces to use the required wire fixed in the keel inside Hook on. The installation of the overall way to use the lifting of the wooden grille skeleton as a whole to get above the elevation line, with the ceiling of the hanging pieces connected to all the hanging pieces and grille skeleton connected, by adjusting the length of the hanging pieces of the grid surface </p>
<p>leveling , The grid skeleton adjusted to the control line flush, the surrounding wood keel fixed in the wall of the wooden wedge. 3, ecological wood grille skeleton processing points on the ecological wood grille skeleton to be finishes, the general paste a good piece of wood, the installation of lighting and mouth decoration lines, lamp base can be made in the wooden grid frame When installed, connected to power after lifting. Grille frame decoration should be </p>
<p><a href='http://thedecking.co.uk/composite-deck/2663.html'>composite timber cladding perth</a><br />
<a href='http://greendecking.co.uk/pvc-fence/537.html'>lattice and fencing in durban</a><br />
<a href='http://thedecking.co.uk/outdoor-bench/1565.html'>can you use patio tiles on grass</a></p>