<p>and move, slit, but also for the future because of the need to do the entire venue to move. (2) partial bonding: on the ground to the edge of the floor brush 20cm inward brushing. (3) full adhesive: all the glue on the ground in the upcoming laying glue. Third, pvc sports flooring installation steps 1, the laying of the ground must be smooth and clean. 2, PVC sports flooring before laying, it must be </p>
<p>tiled in advance laying the ground for more than 24 hours, and the site temperature should not be less than 15 ��. Floor reduction, cut at both ends should stay 5cm. Before pasting, unfold the unrolled floor about halfway in the reverse direction, then apply the glue - starting from the middle - the glue is applied with a toothed scraper. 3, according to the order of the number of the floor line up, align </p>
<p>the merger, pay attention to the pavement process to align the site line. 4, along the seams at the open two adjacent floor, the manufacturers supporting the special connection on the lower part of the joint at the surface of the adhesive brush, first one of the panels stuck half of the connection, and then Stick the other half to the rest of the connection strap, the gap can be tight. 5, it is recommended </p>
<p>treatments boat floor material in new zealand<br />
outdoor deck calculator<br />
plastic or wood cutting board</p>