<h3>Anti-dry moisture on both sides of grasping</h3>
 
<p>Winter decoration on the impact of wood mainly in the temperature and humidity in two ways. Temperature is too low or too high, can cause adverse reactions of wood, curl and even cracking. The main material should be prepared in advance, preferably in a heating equipment placed indoors 3 to 5 days in order to let the moisture content of wood close to the house level, so as to avoid future deformation. In addition,build bench onto deck the wood into the decoration site, should be avoided in the ventilation, or its internal moisture will quickly drain away due to drying. When the humidity is low to reduce ventilation and heating facilities in the vicinity of a pot of water to promote its evaporation, so that the wood can be safely winter.</p>
 
<h3>Wood products timely sealing oil</h3>
 
<p>Winter wood brittle easily cracked may not be able to see, but if the painter seal oil work is not timely, it is likely to cause the veneer surface veneer cracking. For the use of the income side of the wood line, the moisture content than decorative panels,brown decking materials board after processing, as soon as possible to the surface seal oil, otherwise there will be contraction, affecting the appearance of wood floor finishes.</p>
 
<h3>Do not forget the expansion joints</h3>
 
<p>Winter air drying, when the workers pavement wooden floor, about 2 mm of the expansion joints are essential, otherwise the future prone to drums, floating phenomenon. If you encounter water leakage, water and other phenomena on the wooden floor, it is necessary to dry in a timely manner,plans for curved patio block bench can not let it directly in the sun exposure or electric furnace baking. In order to prevent deformation, the wall on both sides of the floor can be opened until the moisture is scattered, and then re-install.</p>