<p>1. Improve the stability of the use of the floor,outdoor hollow wpc wall cladding panel wood uneven wet or dry shrinkage, often caused by dry and deformation of the floor, affecting the use, such as no good wood processing into the floor, just finished the assembly was used to match exactly, but after A period of time with the use of dry wood will occur on the floor warping,<a href="http://outdoorwpcflooring.com/uk/490.html">wpc products cheaper expensive</a> tongue and groove loosening, paved after the sound of crunching, severe cracking and other phenomena board surface.</p>

<p>2, to improve the strength of wood flooring, wood strength will decrease with the moisture content of wood increased,white door plastic lowes after drying the floor billet can improve the cutting conditions, improve the strength of wood flooring, cementation and floor paint quality, wood Of the thermal conductivity and electrical conductivity with its moisture content is also changing to improve <a href="http://outdoorwpcflooring.com/manufacturers/352.html">interlocking rubber decking tiles</a>the thermal insulation of wood.</p>

<p>3, the prevention of wood floor billet derogation and decay wet wood flooring blank,wood plastic composite exterior wall cladding cape town if the long-term transport in the way, or stacked in the open air, if not take appropriate measures, often decay or pest, the general practice When the wood moisture content is less than 20%; when the fungi and pests can greatly reduce the damage and damage, so under normal circumstances, the floor moisture content should reach 8% -15%, so not only to ensure the inherent nature of wood and Strength, but also improve <a href="http://outdoorwpcflooring.com/manufacturers/2107.html">china ceramics floor tile sales ghana</a>the wood's corrosion resistance.</p>