<p>solid wood flooring: Abstract wood, acacia wood, camphor wood, Pontianak iron wire, two winged beans and other 2 common Malay Gan Croton; the hardness of the wood floors are: ash, birch, beech, oak, maple, cherry wood; 3 soft wood floors: ash, birch, Chinese fir etc.. The floor in the hardness of choice can not choose too hard, feel good, relatively hard, not suitable for old people and children of the family, so to choose suitable hardness of wood floor according to their status of family members.After </p>
<p>the completion of the laying of solid wood flooring, also need a step of acceptance. How to wake up the quality of solid wood flooring acceptance, this paper is to introduce you. Small series through the state of the laying of the quality of solid wood flooring acceptance criteria and we analyze one by one. First, laying quality acceptance standard of wood flooring standard from large area \ smoothness \ two floors tenon mortise joint roughness \ \ acceptance gap size. (1) after the laying of large area flatness after the </p>
<p>laying of large area flatness according to the State Economic and Trade Commission WB/T1016---2002 standards: solid wood flooring wood flooring is less than or equal to 5mm; 3mm. Method: usually if there are no obvious visual uneven. If there are special requirements, can be used to measure the 2m ruler, its test methods: 2m on foot to land into a flat shape, and then in the 2m by foot maximum distance from the ground, the feeler stuffed, the value is less than the amount of data that is qualified (test point per </p>
<p>best hidden deck fasteners<br />
see colour choices of cladding available<br />
plastic wall panel system</p>