<p>double-sided adhesive tape (1) the glass must be fixed on the aluminum frame design position, in the plane of the aluminum frame and glass to determine the baseline positioning, positioning fixture using the positioning to determine its exact location, Requirements of the deviation within �� 0.5mm. After the aluminum frame is placed, paste the double-sided adhesive tape on it. Double-sided adhesive tape to </p>
<p>ensure the thickness and width of plastic seam. The thickness of the double-sided tape should be 1mm thicker than the glue seam because the tape is compressed by 10% due to the glass weight after the glass is placed. (2) paste the double-sided adhesive tape, the tape should be kept straight, under the pressure so that the tape attached to the aluminum frame, but the hand can not touch the adhesive surface, </p>
<p>so before putting the glass, do not tear off the tape isolation Paper, in order to prevent the plastic surface is contaminated. (3) glass on the double-sided tape should be a successful positioning, not moving the glass back and forth. Otherwise, the adhesive stuck on the glass will be difficult to ensure that after the injection structure adhesive paste solidity. In case sticky adhesive on the glass surface, should be re-</p>
<p>patio deck tiles over concrete slab<br />
china pvc board Egypt<br />
green plastic polyresin perimeter fence</p>