<p>Many friends abandoned solid wood floors and chose composite floors because solid wood flooring is prone to arching. Use solid wood flooring, for the sake of beauty, no expansion joints for the floor. This problem is obviously a violation of the laws of nature, because everything has more or less thermal expansion and contraction, and it is still laying on the floor in cold weather.</p>
<p>At that time, it was in a state of shrinkage. In order to look good, the seams were made small, and it was a hot day. Not arching is impossible. Second, glue is used in large quantities for so-called fixing. Here are some details of the problem. If it is plain, then using white latex or 903 glue is no problem. The principle is to allow the floor to absorb moisture and then to polish it. He will not change anything. If it is a lacquer board, it is recommended that it be dispensed with glue. If you want to use it, you must use only a small amount of 903 glue. Never use white latex. At the time, the decoration company used white latex. Because the white latex was a water-based glue, the moisture of the wooden floor would certainly rise.</p>
<p>So, the arch of the composite floor? I think we haven��t heard of any vendor talking about this issue. In fact, due to the laying problem, the composite floor will not be partially arched, but it will be arched as a whole. Because the composite floor has no fixed point in the middle of the room, based on the natural laws, the composite floor will inevitably have thermal expansion and contraction. Therefore, many laminate floorings will have a soft feeling when they walk up. This is because they have been arched.</p> "Boat Floor Wood Thickness,Woodworks Channeled Tegular Ceiling Price,buy 8ft garden fencing in cardiff "