<p>Conditions - Clear weather must be selected when waxing, humidity is too high on rainy days and white turbidity will occur. Generally, the floor wax will harden when the room temperature is below 5 degrees.</p>
<p>Cleaning��Before waxing, the surface of the floor must be cleaned of dust and dirt. You can use a vacuum cleaner or use a diluted neutral detergent to wipe it; use a water-repellent wipe for difficult-to-clean stains. Do not use chemicals. Causes poor adhesion of floor wax.</p>
<p>Drying�� After cleaning, carefully check the surface of the floor, especially the detergent remaining in the groove, otherwise the surface will be whitened and bulging. After the water is completely dry, it can be waxed. Drying time is also different, usually only 10 to 20 hours in summer.</p>
<p>Waxing ---- Shake the container with floor wax and stir it evenly. Before the entire room is waxed, it can be used for local trials in unobtrusive places. After confirming that there is no abnormality, it can be waxed as a whole. Then use a clean rag or a special waxing mop to fully dip floor wax. Apply carefully according to the direction of the wood grain of the floor. Do not paint or uneven thickness. Keeping thin and even is the key to waxing. Do not pour the floor wax directly on the floor, otherwise it will produce traces of stains and circles. Finally polished with an imported machine so that the floor will look brighter.</p> "wood supplier malaysia,deck veneer for existing deck,kingpan cladding marine environment "