<p>What glue can stick to the glass without traces, cohesive gluing can help you solve the problem for glass-bonded metal, higher strength; JT964 is a high-viscosity glass viscose metal glue. This series of glass-bonded metal UV shadowless adhesive strength than most of the imported UV glue on the market has more than 30% increase, especially for aluminum cake diameter external composite floor 2 x 6 material  less than 5 cm in the bonding of this series of glass viscous metal UV shadowless adhesive high temperature performance Good, can be baked into the furnace does not fall off this system of glass viscous metal UV shadowless adhesive can withstand high temperature and humidity for a long time, hours to maintain high strength and toughness glass viscous UV shadowless rubber curing speed Fast, can be positioned in seconds, fully cured in tens of seconds; Excellent anti-aging properties</p> <p> finished products can be used in the room for 13 years without losing the intensity. This glassy cheapest place to buy decking boards dublin  viscous metal UV shadowless adhesive is to be cleaned and cannot be cleaned. There are oil stains and sundries in this series of glass viscous metal UV shadowless light source and light curing method selection: regular UV light, ordinary mercury lamp (mercury lamp) and sunlight can meet the crystal special UV shadowless adhesive bonding requirements, But if you want to pay attention to efficiency, then the outdoor furnishings Norway  stronger the UV light source is, the faster the curing speed is (the faster the surface temperature of the adherend is, the faster the curing speed is.</p> <p> The closer the distance, the faster the curing speed. Therefore, prior to batch use, relevant tests should be conducted based on the local natural environment and conditions and the proficiency of construction personnel in order to determine the best operating procedures. The ideal adhesive layer thickness of the current glass-bonded metal UV shadowless adhesive is 0.01-0.05mm, too thin or too thick will affect the adhesive performance. The current glass-bonded metal UV shadowless adhesive ensures that the adhesive layer absorbs enough UV energy to achieve the best curing effect, otherwise it will easily affect the adhesive properties of the adhesive layer. The current glass-bonded metal UV shadowless adhesive must not move the material back and wooden prices for decking south africa  forth when exposed to ultraviolet radiation, otherwise it will easily cause whitening of the adhesive layer and a decrease in adhesive strength.</p>