<p>Anaerobic adhesives have unique anaerobic adhesive properties and can be used for locking, sealing, holding, bonding, and plugging. Anaerobic adhesives have become an indispensable liquid tool for the machinery industry. In aerospace, military, automotive, machinery, electronics, electrical and other industries have a very wide range of applications.  Lock tightly. Metal screws wood water resistant are easily loosened or off-line due to shock and vibration. The traditional mechanical locking methods are not ideal, and chemical locking methods are inexpensive and effective. If the screw is assembled after the anaerobic adhesive is applied to the rabbit, a strong plastic film is formed in the thread gap after curing, so that the screw locking will not loosen.</p> <p> Seal leakproof. Any plane can not be completely close contact, need to leak seal, the traditional method is to use rubber, asbestos, metal gaskets, but will soon leak due to aging or corrosion. The use of anaerobiccomposite floor maersk supplier  adhesives instead of solid gaskets, after curing, can achieve close contact, making the seal more durable. Anaerobic adhesives are used for the sealing of threaded pipe joints and threaded plugs, the sealing of flange mating surfaces, and the sealing of the mechanical box joint surfaces, all of which have good leakage prevention effects. Holding position.</p> <p> Cylindrical row components, such as bearings and shafts, pulleys and shafts, gears and shafts, bearing and seat holes, bushings and holes, etc., hole shaft assembly accessories, previously solid fencing low maintenance without exception, the use of hot sleeve, cold pressure and other size interference method re-assembly , supplemented by keys and pins. This fixing method requires strict machining accuracy, and due to the difference in thermal expansion coefficients, wear and corrosion occur, and loosening is easily generated. The use of anaerobic adhesive can fill the fit gap, solid and durable after curing, stable and reliable. </p> <p>The method of holding anaerobic adhesive reduces the processing precision, the assembly operation is simple, the production efficiency is improved, the energy consumption of the delivery and the processing cost. Fill plugging. For microporous castings, die castings, powder metallurgy, and welded parts, a low-viscosity anaerobic adhesive (B-290) can be applied to the defect so that the glue penetrates into the micropores and is isolated at room temperature. In the case of oxygen, the cure can be completed, filling award winning patio floors Saudi Arabia the hole and sealing. If vacuum infiltration is used, the success rate is higher and it has become a new technology in the foundry industry.</p>