<p>Construction process Surface requirements: The surface of the adherend needs to be dry and clean to ensure no stains, rust, etc. The surfaces of smooth materials such as splints and rubbers plastic wood effect ceiling cladding    should be sanded to a rough surface and clean before applying the product. Glueing method: In order to achieve the best adhesive effect, stir the glue thoroughly before use or turn the drum several times to make the glue liquid mix evenly.</p> <p> The general material can be coated with a thin layer and can be glued in the same direction. It will help to drive out the air and improve the uniformity of the coating and enhance  composite wood fencing supplier   the adhesion. The amount of glue applied is controlled between 195 and 250 g/m2. Airing: After the glue is applied, it must be left to stand for a period of time until the solvent is volatilized.</p> <p> In order to prevent the adhesive layer from sticking or bubbling, the bonding quality is affected. The open time should not be too long, so as not to lose the adhesive layer, resulting in degumming. Bonding: As the current super-purpose adhesive series has a strong initial adhesion, it should be aligned at one time when it is bonded, and it should be pressure-shocked and not moved back  build a deck next to pool   and forth so as not to affect the bonding effect. Use tools Roller tools, brush, trowel, scraper, etc.</p>